Logo
FULL SITE MENU

Spark plug seized and getting round

H

hmeislin

New member
Spark plug broke off. Can get

Spark plug broke off. Can get socket in after using penetrating oil but the plug is getting roounded and I can't get torque. What now? Will an easy out work?
 
"If you have been using a 12 p

"If you have been using a 12 point socket, stop now. You need to drill the plug out for an easy-out to work and the chance of the electrode and other debris falling into the cylinder is pretty good. Call a machine shop and ask if they can get it out for you without removing the head. If it has to come off, it's not the end of the world but it's not going to be fun."
 
Harvey - see the advice on you

Harvey - see the advice on your similar post four below. You're going to get the same answers here. Sounds like it's time to hire a mechanic.
 
"Harvey
Just a tip, when ever

"Harvey
Just a tip, when ever you replace a plug put a smear of never sieze on the plug thread, saves alot of hassles.
Cheers
Peter C"
 
Back
Top