Logo

Lean or Rich Adjustment

glenn_dombroski

Contributing Member
"Just read another post that s

"Just read another post that said rich = black smoke etc. Which way do you adjust the screw to fix this, in or out?"
 
"screw in leans. keep in mind,

"screw in leans. keep in mind, you are only adjusting idle mixture. any higher speed is fixed."
 
"Im lost.... I have 2 carbs an

"Im lost.... I have 2 carbs and when I turn the screw in too much it stalls, (on each carb seperatly) and out seems like I cant tell the diffence in the carbs as it is running. How do you match them so they run the same together?"
 
"Glenn, most likely. make sure

"Glenn, most likely. make sure your choke is opening fully while you're at it. and clean the flame arrester."
 
Back
Top