PDA

View Full Version : OMC 400



tonga
08-13-2003, 06:06 AM
" dose someone have a schematic for the wiring for the tilt motor on a OMC 400? ,,,the solonoid clicks but she won't raise "

colton l andreoli
03-05-2004, 01:59 AM
"Same problem here, but she wont go down, need some help here with a 78' rennel coast guard aux boat. just clicks -Colt @ [email protected] ("")"

Bubster
03-30-2004, 10:03 PM
" I had the same problem with my '74 Slickcraft with an OMC Sterndrive. I replaced the tilt motor and it has worked fine ever since. As long as the relays are clicking my guess would be the tilt motor. The blue/green wires connecting to the tilt motor power the motor up/down and it gets ground from the housing. You could try connecting the postive terminal of the battery to one of the leads of the motor and if that doesn't do it, it's definately bad. Also I found that trying to rebuild the motor myself was a lost cause. Good Luck. "