Logo

1984 johnson 25 hp lower case lube

A

AZ4X4

Guest
how much lube goes in the low

how much lube goes in the lower case?
thanks for any help
 
" unscrew the two (2)

" unscrew the two (2) slotted screws on the lower unit,put your oil pump in the bottom slotted screw on the gearcase (not the phillips head), and just start pumping oil in, untill it comes out the top hole, then put your top screw in and quickly put the bottom screw in after taking off the hose for the oil..a few drops lost in between the transfer should not matter, just make sure its not more then one oz. "
 
" FYI-I did loosen the other s

" FYI-I did loosen the other screw. Actually took it all the way out. Any trick to getting everthing back in alignment?

Thanks,

Bill "
 
Back
Top