Logo

Speedo

donmega

Member
Hello... just recently my spee

Hello... just recently my speedo stopped working... where should i start to get it working again?
 
check for a clog in the little

check for a clog in the little hole on the forward facing leading edge of the lower end of the drive. That is the water pick up for the speedo. Once clear you can also GENTLY blow air through the speedo water pressure hose leading down into the drive. Accessed at the forward portion of the drive between the trim rams. You may need to see a manual. my thoughts. DH
 
You could try blowing the line

You could try blowing the line backwards from the hose connection on the back of the speedo. That is probably the easiest to get to.
Rod
 
Back
Top