Logo
FULL SITE MENU

1975evinrude135hp starflite

J

John Colucci

Guest
My quick connect fitting on m

My quick connect fitting on my fuel line is leaking slightly it seams that the fitting on the motor side is worn.Are they still available?
 
John
Those fittings on the e

John
Those fittings on the engine side dont wear out very often actually ive never seen one wear out. It more than likely that the fitting on the fuel line is bad. This is because they use an o ring to seal. You can get these fittings just about anywhere that sells boat bits but the genuine ones from your local Johnson / Evinrude dealer are the best. You can also get the motor end from your dealer if necessary.
 
Back
Top