PDA

View Full Version : Navigator trolling motor setup



modelt
08-27-2016, 09:26 PM
i have a dual electric motor setup, Marinetech
a total of 110 # thrust
both motors are wired to one remote control ..
only 1 motor turns
any suggestions ?

thanks ......

johnnygjr
08-28-2016, 12:46 AM
On motor that does not run on remote,hot wire it,jumper cables from battery + to motor+ And ground from batt, to ground on engine

modelt
08-30-2016, 06:44 PM
i hotwired the motor to the battery and it turned.
on my navigator dual motor setup, there are external fuse blocks on each wire connection to the battery.
anyone familiar with this type of fuse ?
the bottom portion of this block appears to be a sealed unit.

modelt
08-30-2016, 07:17 PM
i hotwired the motor to the battery and it turned.
on my navigator dual motor setup, there are external fuse blocks on each wire connection to the battery.
anyone familiar with this type of fuse ?
the bottom portion of this block appears to be a sealed unit.

THIS FUSE IS MANUFACTURED BY " COOPER BUSSMAN, called a SHORTSTOP
its suppose to be re set able, anyone know how to do this ?

thanks