Logo
FULL SITE MENU

Mercury 90 2 stoke 2004

C

cyclone540

New member
I have a Mercury 90 and it won't go into forward gear. I moved the shifter into reverse and then moved it quickly into forward and it worked. Other times I have moved it backwards and forward until it engaged in forward. Also at other times, it hasn't gone into any gear no matter how many times I moved it. There is a button on the shifter so that you can rev the engine, could the problem be this button not popping out or engaging(Its a Quicksilver 3000)? Or could it be the cables? Any help/ideas are appreciated. Thanks.
 
There is a button on the shifter so that you can rev the engine, could the problem be this button not popping out or engaging(Its a Quicksilver 3000)?
Click to expand...
If button was sticking it wold not engage reverse when you do this.... sounds like a cable problem.
 
It's either bad cable adjustment, or the LU shifter splines and the top shifter are not in the correct alignment (which often happens after an impeller change).

Jeff
 
Back
Top