Logo

steering problem

ryomi

New member
Hi. hoping someone can help
I have a fly bridge Bertram 28,when I turn the top helm hard to starboard the ram works fine and the twin rudders behave normally, however the helm keeps turning and wont stop.On full port it stops as expected, below helm works fine
I'm now in the process of replacing the seals on the Hynautic k51 ram as there was a slight leak, could an airlock be the cause of the problem or is it mechanical ?
 
air in the system will cause your symptoms...been a while but seem to remember the hynautic systems have a reservior that needs to be pressurized of the system won't behave properly too...little silver can, usually under the upper helm...
 
air in the system will cause your symptoms...been a while but seem to remember the hynautic systems have a reservior that needs to be pressurized of the system won't behave properly too...little silver can, usually under the upper helm...[/QUOTE
thank you will look into that and let you know the result
 
Back
Top