Logo

Deck covering

JayBee173

New member
Hello Iam tearing out carpet on my Lund boat, and the plywood is good. but carpet was put on ply and put down with rivets they have carpet under them. So I took a torch and hit each rivet and melted the carpet back worked great. The rivets stick up and I want too cover with plywood and cover with tuff coat. What plywood grade can I get away with acx or what ? It will be glued down, should it be treated, the plywood Lund put in is marine , so bottom will be sealed. I will seal sides and glue a screw down. Hope someone can give me info thanks jay bee
 
Back
Top