Logo

start problem

Nick13

New member
Hi,

I recently bought a new 4 stroke 3.5 Evinrude and I have 2 problems with it already.

1. when I lay it down n the back of my car (in the right side as it's shown in the small picture on the side of the motor), oil comes out of it. the oil lead is tight and I tried to put its head a bit higher than the rest but still oil comes out of it.

2. it gets flooded I suppose almost all the time while I'm on the boat. I make sure choke is fully in and fule is off when it's off, but since I got it, I have this problem and it's so frustrating and embarrassing.

I took it to the Marine shop where I got it but they don't take any responsibility. my both problems are not examinable in 5 min you need to run it for 30 40 min to have it flooded, anyway I will really appreciate if anyone could help me here with some advice.

Cheers

Nick

 
^Bump^ C'mon members, I know at least one of you can help this new member with his problem. Unfortunately I'm limited to 2 strokes.
 
Back
Top