handyharry
New member
Hello
I have a 1971 100Hp Evinrude with a charging problem.
i have checked the ac voltage at both legs of the stator and get around 24V AC depending on engine revs. i have 15 to 18 volts at the DC leg of the Rectifier, but the rev counter is not showing that the system is working, and i have no change in battery voltage (12.6 to 12.8 engine stationary) with the engine running at medium to high revs.
An Ampmeter connected into the power supply shows up to 2.8 amps discharge when running.
What is going wrong here?
Hope someone can help me
Handy Harry
I have a 1971 100Hp Evinrude with a charging problem.
i have checked the ac voltage at both legs of the stator and get around 24V AC depending on engine revs. i have 15 to 18 volts at the DC leg of the Rectifier, but the rev counter is not showing that the system is working, and i have no change in battery voltage (12.6 to 12.8 engine stationary) with the engine running at medium to high revs.
An Ampmeter connected into the power supply shows up to 2.8 amps discharge when running.
What is going wrong here?
Hope someone can help me
Handy Harry