Hello, I am going to replace the seals on my trim unit and need the correct pin spanner wrench. Would like to find
one local (i.e Napa). Having trouble finding the specs for A) the correct size (diameter) of the pin holes and B) the correct
distance between the pin holes.
My boat is not close to me to obtain this myself and I hope to buy the right tool the first time before I get to the boat. If I get
lucky this time it may be a first
Thanks, PC
one local (i.e Napa). Having trouble finding the specs for A) the correct size (diameter) of the pin holes and B) the correct
distance between the pin holes.
My boat is not close to me to obtain this myself and I hope to buy the right tool the first time before I get to the boat. If I get
lucky this time it may be a first
Thanks, PC