Logo
FULL SITE MENU

Fuel Line Setup

P

pharlap

New member
Hey Guys, I'm fitting a fuel/water separator filter bowl and I want to get some ideas as to the best way to link it up.

Its for the 130hp johnson ocean pro 2 stroke V4.

I've been advised a few things/ways, the most common is to install it this way:
From the fuel tank pickup- fuel hose to- in line fuel filter-fuel hose to-fuel/water separator filter bowl- fuel hose to-primer fuel bulb- fuel hose into the outboard motor.

I've also been advised to install the primer bulb before the separator instead of after.

Which way is the best way guys ?

Also what size diameter fuel hose should I be Using for this size motor ?

Cheers the red terror.
 
3/8 inch hose....i would not run both inline and water separator filter ..you already have a filter inside the cowl..go from the fuel tank to the bulb to the water separator to the engine..
 
i see from another entry that the boat has not been run for a year or so...get rid of the old fuel and dont use it...
 
Last edited:
Back
Top