Logo

1992 DT 2 "Bottom Drive"

cruz

New member
New to working on boat motors. Im changing the Propeller Shaft. It broke in half where the shear pin goes through.
I need to take off the bottom drive to get the propeller shaft out. I removed the two 10m bolts that are underneath
but it dosnt seem to want to drop out. Before I take out the hammer just wanted to know if anyone on here could help
me out.

Thanks alot
 
Go to brownspoint.com and look up the HP and year.There are diagrams of the lower unit which should help you out.Hammers are never a good idea.A soft rubber mallet if it is stuck.
 
Back
Top