New to working on boat motors. Im changing the Propeller Shaft. It broke in half where the shear pin goes through.
I need to take off the bottom drive to get the propeller shaft out. I removed the two 10m bolts that are underneath
but it dosnt seem to want to drop out. Before I take out the hammer just wanted to know if anyone on here could help
me out.
Thanks alot
I need to take off the bottom drive to get the propeller shaft out. I removed the two 10m bolts that are underneath
but it dosnt seem to want to drop out. Before I take out the hammer just wanted to know if anyone on here could help
me out.
Thanks alot