PDA

View Full Version : Replacing wheel cylinders



Guythunder
09-27-2012, 08:44 PM
I need to know if there is a trick to making wheel cylinders last longer.? I have had to have a couple of surgeries and have been laid up for two years on each one And I just put wheel cylinders in before the first surgery
. And in between both surgeries I wanted to go fishing, But due to a few bad wheel cylinders that I had to replace my trip was off. So every time my boat site for a year or two the cylinders take a s---. This trailer is a 2000 Tricker Trailer.

chawk_man
09-28-2012, 09:07 AM
I assume you have surge brakes. Best way to keep them working well is to use them. After they sit unused, the seals dry out and the exposed cylinder walls rust up. If you must store it for long periods of time, block up the axel and get a friend to spin the wheels while you activate the master cylinder.

Guythunder
09-28-2012, 03:51 PM
Yup thats what I was thinking, Or at least go out and pump the actuator a time or two every month. Thanks.