Logo

2000 30HP Honda 4 stroke

scootrpy

New member
My motor stopped spitting out water. I checked to make sure there was nothing clogged, all was fine. What else should I check or is my motor shot ??
 
does the overheat alarm sound ?
if it's not overheating it could be there is a blockage.
take a piece of light wire and run it through the discharge tube.
you may have to take off the tube and clean out the fitting at the engine.
 
I am with dark_star, probably just a blockage. Try shooting compressed air back up through the hole if the wire does not work.

Mike
 
Back
Top