Logo
FULL SITE MENU

1995 Johnson 99 HP Prop Replacement

B

Brian W

Guest
"Could someone please walk me

"Could someone please walk me through removing and replacing the prop for my 1995 Johnson 9.9 HP? I could figure it out, but since I'll be waist deep in cold water, I want to shorten my learning curve as much as possible (grin). Thanks, Brian"
 
"Take out the cotter pin, unsc

"Take out the cotter pin, unscrew the nut (spark plug size), take off the plastic spacer, pull out the prop. Carefull and do not loose the thrust washer at the gearcase end of the prop! Grease the propshaft/prop hub before reinstalling, and do not overtighten the nut!(fingertight an 1/4 turn)."
 
dont drop any of the parts or

dont drop any of the parts or you will be more than waist deep in the water--why not haul the boat out?
 
"Thanks! This will greatly sho

"Thanks! This will greatly shorten my immersion time! Tom, the boat is a sailboat and I'd sell my first-born rather than haul her out if I can get around it! Thanks again, Brian"
 
ya okay but the motor is only

ya okay but the motor is only a 10 hp--why not just remove it and work on it in a shop--why risk dropping everything into the water--
 
Back
Top