I have a 1991 johnson 40hp 2-stroke that idles rough and surges past 2000 rpm.
Thought maybe it was a carb problem but they have been rebuilt,
Changed coil, plugs.
Next step is the voltage regulator.
Will run all day at idle, and the water flow from the lower unit has a good stream,
Can't seem to get it past 2000 rpm without it loosing power and surging.
Any ideas or help would be greatly appricated!
Thought maybe it was a carb problem but they have been rebuilt,
Changed coil, plugs.
Next step is the voltage regulator.
Will run all day at idle, and the water flow from the lower unit has a good stream,
Can't seem to get it past 2000 rpm without it loosing power and surging.
Any ideas or help would be greatly appricated!