Logo

Warning Alarm

My 91 60HP E60TLEIB goes off when I turn the key swicth to on without starting the motor. Noramlly I would get a ~1 second beep and it would turn off. Thanks for any help
 
If going on with a constant beep, most likely a defect horn. Disconnect temp switch, VRO plug and VRO-oil-tank alarm lead and test. If the same, change horn, if OK, connect each switch back until problem starts.
 
The alarm has three leads going to it. If I disconnect the center lead, the voilume falls off. Doesn't something have to signal the alarm i.e. doesn't it has to get either 12V or ground from device? In regards to the devices that can generate the alarm(s), can you tell me what color wires I should be looking for?

Thanks for your help
 
The alarm leads are Brown/Tan in color.
You may remove the Tan lead into the horn, put on ignition and should have a short beep. If constant - change horn.
 
Back
Top