Logo

?'s on Carb 2000 15 Johnson

Lerie

Member
had an earlier post about motor quitting at low speed. Thought I finally had it solved when I began to adjust the low speed needle out. Motor did not quit, but the idle was extremely high. Adjust the idle down and it quits. Runs at mid-range to high speeds fine. The one thing that seems strange to me is the amount of turns out from being seated that I had to turn out the low speed needle to get it running - 3 1/2. that seems really high to me. Have had the carb apart 3 times for a thorough cleaning. Any ideas before I order a carb kit and other parts.
 
Back
Top