Logo

Circa 80s ( 150xxx) BF75 Water Pump Parts Question

sandkicker

Outstanding Contributor
Several websites each list two different P/Ns for the same part in the diagram, i.e., the SS plate that fits between two gaskets at the base of the water pump housing. Mine shows moderate wear, but since the housing is shot and the impeller is old, I'm thinking of replacing it regardless. The two P/Ns listed are:
19231-881-000 and 19231-881-840. What is the difference between these two parts?
 
At first look, it looks like one supercedes to the other, but they are not superceding from what I can see. It almost looks like either could be used. In some models, only one will work...but it depends on the model and serial number.

Post the frame serial number and I will check.

Mike
 
At first look, it looks like one supercedes to the other, but they are not superceding from what I can see. It almost looks like either could be used. In some models, only one will work...but it depends on the model and serial number.

Post the frame serial number and I will check.

Mike

Its... 1500698 (Long shaft, it that matters)

TIA

Bob
 
Back
Top