fixmycobra
New member
Thanx everyone for helping me with the stalling problem i was having. it turned out that the micro switch was off. just had to adjust it a bit. Now im having another problem. I saw that the positive cable leading to my starter selanoid was loose so i went to tighten the bolt. well, guess what happen. it snaped the plastic casing. So, I went and bought me a replacment selaniod. installed it and the motor is still not cranking at all. turn the key, no sound. so my question is, what could be causing this, could it be the micro switch because i was messing with it too much? could it be that the starter s completely dead? i check all the wiring and fuses they're working. I'm at a lost. help help pls