matt.speedtriple
Regular Contributor
Hi folks and greetings from Dundee Scotland,
As i`ve just joined then i thought i`d say Hi first off.
I own several outboards 3 of which are honda 4 strokes. An old 10hp, a 1997 BF25 and a 2000 BF50.
I bought myself an ultrasonic cleaner the other day and it arrived this morning so i thought i`d strip the carbs off my 25 as it`d been struggling midrange and at times could only get to WOT by blipping the choke on and off.
Anyway, i stripped the carbs down and gave them a good go in my new toy and everything came out really well. The problem is that when blowing the parts out with carb cleaner then i noticed two of the jets were cracked as they were spraying fuel in different direction than they should`ve been.
My question is what effect would this have on the running of the engine?
Cheers, Matt.
Forgot to add that the jets that are cracked are number 19 on this diagram http://www.boats.net/parts/search/H...1000001 TO BAJL-1999999/CARBURETOR/parts.html
As i`ve just joined then i thought i`d say Hi first off.
I own several outboards 3 of which are honda 4 strokes. An old 10hp, a 1997 BF25 and a 2000 BF50.
I bought myself an ultrasonic cleaner the other day and it arrived this morning so i thought i`d strip the carbs off my 25 as it`d been struggling midrange and at times could only get to WOT by blipping the choke on and off.
Anyway, i stripped the carbs down and gave them a good go in my new toy and everything came out really well. The problem is that when blowing the parts out with carb cleaner then i noticed two of the jets were cracked as they were spraying fuel in different direction than they should`ve been.
My question is what effect would this have on the running of the engine?
Cheers, Matt.
Forgot to add that the jets that are cracked are number 19 on this diagram http://www.boats.net/parts/search/H...1000001 TO BAJL-1999999/CARBURETOR/parts.html
Last edited: