Logo

trim indicator sender adjustment for volvo penta D6-370

torque

New member
can someone help me with the trim adjustment for D6-370 volvo penta engine. I've done some adjustment for the old system with a potentiometer on top of the transom with a lot of room for adjustment before but this one is on the port side of the transom shield and seem to have none. The engine room is quite tight and its very difficult to get into it.. any ideas would be appreciated.. thanks in advance...
 
The sender unit has not got manual adjustment unlike the older system, there is calibration that can be done via the EVC system.
 
Last edited:
Back
Top