racquethand
New member
Hi,
First problem is engine starts and runs well at medium to high speed , but when putting the 703 controller in reverse the throw seems to be to short and the engine will only go in reverse manually with the remote dissconnected.
Second problem is after the engine has run a while when the control is returned to idle position the engine is running way to fast to shift without damaging the lower unit, when the engine is cold the idle speed is fine for shifting. Also the cold engine idle is on the rough side.
Bill
First problem is engine starts and runs well at medium to high speed , but when putting the 703 controller in reverse the throw seems to be to short and the engine will only go in reverse manually with the remote dissconnected.
Second problem is after the engine has run a while when the control is returned to idle position the engine is running way to fast to shift without damaging the lower unit, when the engine is cold the idle speed is fine for shifting. Also the cold engine idle is on the rough side.
Bill