Logo
FULL SITE MENU

grease fitting blocked on F150 Yamaha

S

snookwhisperer

New member
I have a F150 that has hy. steering. The steering set up is in front of the tilt tube zirk fitting.
Seems like there's no way to get at it. Any suggestions would be appreciated.
Maybe a 90 degree zerk fitting in metric and ss or a fitting on my grease gun that'll fit a small metric zerk fitting?
Thanks in advance Pat
 
they make a bunch of different fittings just go down to napa and look through the bins youll find somthing that fits perfect, or if you can get a greese line made and have a remote gresse fiting set up
 
There is another fitting that greases the same area but it is located on the aft side of the bracket. You may have already greased it. The motor needs to be tilted to see it.
 
snookwhisperer said:
I have a F150 that has hy. steering. The steering set up is in front of the tilt tube zirk fitting.
Seems like there's no way to get at it. Any suggestions would be appreciated.
Maybe a 90 degree zerk fitting in metric and ss or a fitting on my grease gun that'll fit a small metric zerk fitting?
Thanks in advance Pat
Click to expand...

I was able to get to my grease fittings by merely turning the engines to one side or the other, which moved the cylinder out of the way just leaving the piston. This was with dual engines. I do not know if a single engine is any different.

Terry
 
Back
Top