Logo
FULL SITE MENU

Prop Question

J

jshane37

Regular Contributor
Recently purchased a 1999 Johnson 225 with a 4 blade stainless prop. I would like to put the old prop 3 blade from my old 1998 Johnson 200 on the new 225. I put the old shaft spacer on the shaft but I still have too much of the shaft left and the prop will slide up and down the shaft even with the shaft nut on tight. Do I need another spacer or new shaft?
Thanks in advance
Joe
 
jshane37 said:
Recently purchased a 1999 Johnson 225 with a 4 blade stainless prop. I would like to put the old prop 3 blade from my old 1998 Johnson 200 on the new 225. I put the old shaft spacer on the shaft but I still have too much of the shaft left and the prop will slide up and down the shaft even with the shaft nut on tight. Do I need another spacer or new shaft?
Thanks in advance
Joe
Click to expand...

Ayuh,... Probably needs a different thrust hub...
 
Back
Top