Logo

High speed/low speed settings

KentLucas

New member
I have just inherited a 6hp Sea King motor. I have determined it to be a 1967 model. It runs,but can run better. Can anyone tell me the settings for the needle valves for high speed and low speed? Thanks.
 
There are no magic settings !!----------you put the motor on the boat and warm it up------Go full throttle in gear and adjust your high speed , usually the lower one on the carburetor , for best running , and not too lean. ----------Then idle down and adjust slow speed for smooth idling.--------If it then stalls / stumbles when you open up the throttle open the low speed 1/4 turn and try again.
 
Back
Top