Logo

Merc 125 2-stroke 1996

big-D

New member
Running at idle, engine quits cold turkey. No spark. Unable to re-start. Electronic control or fuse? I don't have shop manual. Owner's manual only indicates 20A starter fuse. Are there other fuses in the wiring harness. Can't seem to find elec. schematic.
 
outboardignition.com Has test procedures for the electronics,stator/trigger etc..
Does it have a kill switch?Check the connection.Under the dash might be a fuse that controls the ignition.
Try wiggling the shifter back and forth(neutral safety switch) as you turn the key.
Does it turn over and not start or nothing?Fill out the profile,you might be close to someone who can help.J
 
Motor turns over fine. There used to be a kill switch at the helm, but was previously disconnected. Ignition is controlled by key switch. I just don't have spark in any of the 4 cylinders

Are there fuses anywhere in the wiring harness or magneto circuit? The only one I can find is in the starter circuit, and it's fine.
 
Back
Top