Logo

Replace trim tilt pump motor 1989 200 hp

JEFF POMP

New member
I have a 1989 yamaha 200 hp 2 cycle and I need to replace the pump motor on the trim tilt. I have taken all the bolts off the pump side and the backet still seems to be held by something.someone told me I need to get the backet off to get at the thriid bolt on the motor. Thax,jeff
 
Last edited:
Re: Replace trim tilt pump motor

Six bolts hold the pump in place along with the shock mount pin and two wire connections. There are two extra bolts on the brackets that you need to remove also. They are the stops. Then you can wiggle the unit out.
 
Back
Top