colinafloat
Member
Thank you all who have given advise thus far .
I am going onboard today & will use the methods you have all suggested to locate this fuel leak . The fuel pump drawing will help . My concern now is what i can inspect without upsetting the set up of the pump ? I know the fuel is coming from the area of the injector discharge pipes . It could be the seals 49/51 but to inspect i would need to remove the centre bolt but would this be safe? The high pressure manifold is secured via 4 sar bolts but again if removed is there any danger of disturbing the precise running of the pump . I feel confident that the leak is in this area & once the manifold is removed i can inspect the various seals & joints properly .
Thank you all again
Colin - Spain -
I am going onboard today & will use the methods you have all suggested to locate this fuel leak . The fuel pump drawing will help . My concern now is what i can inspect without upsetting the set up of the pump ? I know the fuel is coming from the area of the injector discharge pipes . It could be the seals 49/51 but to inspect i would need to remove the centre bolt but would this be safe? The high pressure manifold is secured via 4 sar bolts but again if removed is there any danger of disturbing the precise running of the pump . I feel confident that the leak is in this area & once the manifold is removed i can inspect the various seals & joints properly .
Thank you all again
Colin - Spain -