Logo

Volvo gear still turns shaft when in neutral

nightwatch7

New member
Volvo 41D w/Volvo gear

When I shift in neutral after running,the shaft still is slowly turning.
If I turn engine off and restart, shaft always remains still.

Could this be in the valve of shifter or possible bent plates in clutch bundle
 
not likely the clutch plates are warped...I'd check the shifter/cable and make sure you get full travel at the gear AND make sure you get NEUTRAL on the detent.

Be especially careful if you have older cables (or dual stations, run in series). Any cable will stretch given enough time or cycles. could be as simple as your cable adjustment needs a slight tweak to eliminate a bit of slack.
 
Back
Top