Logo

V4 lost spark on 2 cylinders same side

tablecrusher

New member
I have an evinrude 85895C 1978 year. It has been running well for a while now and haven't had much issue. While out on the lake it sputtered and died and would not turn over at all. I have replaced the spark plugs and check all connections. When I check sparks to the cylinders everything on the left side is not getting a spark. Where should I start looking to correct the problem? Thanks for the help. I have watched this board since I first got the boat and it has been a great help in many aspects.
 
Well to clarify now after I just tried to start it again. It will run, horribly but still not getting spark on two cylinders on the same side.
 
That can be caused by a bad powerpack, timer base, coils, or bad connections. Powerpack would be high on the usual suspect list, but if you have a manual you should check the timer base before spending the $$.
 
Back
Top