chriscraft
Member
Would anyone know what the voltage should be on a Merc 402 when running well above idle? My volt gauge reads 12.4 - 12.5 and my hand held meter reads the same. I checked at the battery, both running and not running, and I checked it at the solenoid. All reading the same. I also have a question regarding the rectifier. Is it located under the flywheel? I found the 2 wires (red and blue) that come out of the stator and to the terminals on the switch box but per the schematic, there should be 2 yellows along with them that go to the rectifier and one coming out of the rectifier to the starter solenoid. I'm thinking that this might be a variation. i'm guessing that this engine is not charging.
Any ideas?
Thanks
Mark
Any ideas?
Thanks
Mark