ChocolateBayouGator
New member
I did a compression test today and here are the findings;
2) 108. 1) 95
4) 104. 3) 95
6) 103. 5) 92
I know from factory compression should be close to 120, and it appears one bank of cylinders is lower over all than the others and there is 15 psi difference from highest to lowest. The motor runs, hard to start when cold, but idles well. Do I need to go ahead and rering the pistons if I am taking the power head apart anyways?
2) 108. 1) 95
4) 104. 3) 95
6) 103. 5) 92
I know from factory compression should be close to 120, and it appears one bank of cylinders is lower over all than the others and there is 15 psi difference from highest to lowest. The motor runs, hard to start when cold, but idles well. Do I need to go ahead and rering the pistons if I am taking the power head apart anyways?