Logo
FULL SITE MENU

1997 150 hp oil problem

P

paul_burgoon

Member
My motor is oil injected and it is not getting oil. I also ran it the motor with no oil for a little. I had oil in both tanks but the shaft going from the carb. to the oil pump disconnected with out me knowing so it wasn't recieving oil. The motor will still turn over every try, but I am concerned with the possible problems that i have caused due to this. Please let me know what I may be looking at for problems and let me know how to fix the oil problem. Thank You
 
you will need to do a compression check on each cyl,
if comp is good just make sure you got the oiler problem fix and go run it.
if comp is low or bad, you will have to rebuild the powerhead.
let us know
 
I needed to replace the clip connecting the cable to the oil pump now that i am replacing it what should i set the rpms or how many twist with the clip should i make?
 
Back
Top