Logo

stuck in forward

fisher74

Member
i have a ns5b. i just replaced lower unit gaskets and seals. put everything back together it all went in nice and easy.the shiftlever shifts but it stays in forward gear. it doesnt engauge into neutral or reverse. started it up ran smoothly no noises or other sounds. i have taken it a part and it looks like everything is fine.any ideas thanks.it was shifting fine before .
 
Last edited:
You need to adjust the shift rod coupling. It's accessed via the neoprene grommet on the side of the exhaust housing "leg". Requires a 10mm socket to set the cap screw between he 2 brass parts of the coupling. Procedure is in the Factory service manual.
 
Back
Top