I have a 1997 150 2-stroke, and miss having a trim switch at the transom. I see there are aftermarket switches available for about $25, wondered if anyone here had ever added one, and how difficult it is.
Looks like all you have to do is run a fused hot wire to the battery, and then a wire to the "UP" spot on the solenoid and one to the "DOWN" connector on the solenoid.
Yamaha also makes a similar part, but their instructions and part numbers are quite confusing...
Here is the unit that is about 25 bucks
Looks like all you have to do is run a fused hot wire to the battery, and then a wire to the "UP" spot on the solenoid and one to the "DOWN" connector on the solenoid.
Yamaha also makes a similar part, but their instructions and part numbers are quite confusing...
Here is the unit that is about 25 bucks