Logo

135HP Mariner Need Help

patrick23

New member
Having a water flow problem. Used to come out fast. I changed the impeller and changed thermostats. Still does not come out fully. It spits out when in Idle and water that is coming out is very hot. When put in gear water flows fine. Can anyone help with this problem? Patrick:confused:
 
When you changed the impeller did you also change the waterpump seals?

Many times the seals in/around the waterpump cover do not survive disassembly to get at the impeller.

Main culprits - waterpump cover gasket, base gaskets, the "oil seal" around the drive shaft or the water tube seal (inside the guide sleeve on the cover)...
 
Back
Top