Logo

Location of coolant temp sensor ports on 1984 4236 block

bigtimeoperator

New member
"Engine is a 1984 perkin's 4.236M

I currently have a temp gauge connected to a sender threaded into the aft end of my engine. I'd also like to install a temp alarm. I can't seem to find a dual purpose gauge/alarm so I'm trying to locate an additional port in the block for an alarm sender. Any hints?

If I wanted to install an alarm for the oil pressure I could tee two senders off the same port, correct?"
 
Re: "Engine is a 1984 perkin's

I added the temp alarm switches to my 6-354s. I removed the plates that have the temp sender bushings and brazed in two new bushings
for the switches. Seemed the simplest and cleanest way to go.
 
Back
Top