"Ron I am not familiar with th
"Ron I am not familiar with the Hilton product you note so can't say if it would be ok.
Merc recommends that those bearings (upper crank, needle, roller(cage) etc) be installed using 2-4-C with teflon which is pretty much just a high speed bearing grease - and it's sticky enough that it will hold things where they belong.
And yes, 2 stroke oil is called for to oil the rings/cylinder and they also suggest that it be used to oil the lower crank bearing (instead of using 2-4-C but do call for 2-4-C on the o-ring at the bottom of the lower crank bearing) during installation....."