Logo

ENGINE BLOCK

To change the block you will h

To change the block you will have to rebuild the bottom end. A used block will most likely need to be bored oversize with new piston and rings. Sounds like you let it freeze. If used in salt water you should covert to a closed cooling system during overhaul.
 
"jerry, while you can use a BL

"jerry, while you can use a BLOCK from a truck, dont make the mistake of putting that ENGINE in your boat. Mainly, marine engines are camed differant to make peak torque at low rpm. That being said, what you would be in for is a total tear down and rebuild of this engine. Unless you are a skilled mechanic, you'd be in over your head."
 
Back
Top