Clicking noise around starter

"On my Crusader 220 I recently

"On my Crusader 220 I recently replaced motor starter and solenoid. Everything worked OK for a few times then she could not start anymore. I am hearing clicking sound from the starter area. At first I thought it was a battery, then I switched cables to the second battery and the same No Start clicking occurs. I would imagine it is not a new solenoid on the new starter, but it could be a slave solenoid under the Circuit Breaker switch. Is this correct or not? The only one thing I did not do is jumper the starter posts to see if engine will crank, which would pin point the problem with slave solenoid. Am I on the right track?
Thanks"

"Yes, it would be good to chec

"Yes, it would be good to check the slave solenoid. You can bypass it and if the starter spins consistently, change the slave solenoid. (easiest to jump the +12V to the little stud with the Yellow/red stripe wire on the starter solenoid.)"