little_buddy
Member
I have a 260 hp m/c with inboa
I have a 260 hp m/c with inboard and after replacing the risors and manifolds I have a overheating problem. the hoses were checked and in the right location sea cock open. Manifolds are too hot to touch but elbows ok .I added coolant Does air have to be bleed from the system? If so what is the proceedure? Kevin
I have a 260 hp m/c with inboard and after replacing the risors and manifolds I have a overheating problem. the hoses were checked and in the right location sea cock open. Manifolds are too hot to touch but elbows ok .I added coolant Does air have to be bleed from the system? If so what is the proceedure? Kevin