PDA

View Full Version : Changing lower unit shaft



texangator
08-10-2009, 04:20 PM
"I have a 2001 225 v max ox66. Finally got the engine running right and I go hit a stump and bend the lower unit shaft. It has a stainless steel prop. Other than the shaft , bearings and oil seals what else should I replace while in there. I am good mechanically but just limited experience with lower units. I don't see any bends on the prop and or any of the casings. Thanks for the help.

I had posted this topic before but can't find it so this might be a repeat.http://www.marineengine.com/discus/clipart/rain.gif"