"I recently had the dis-pleasu
"I recently had the dis-pleasure of changing the oil in my AQ125 for the first time. After all the contorting, reaching, swearing and spilling of oil in the bilge, I decided there was 2 options...set fire to it and claim insurance or figure out a reliable permanent method.
I pulled the drain plug and drilled and tapped the center to 1/4 pipe thread and bought a 1/4 pipe x 3/8 hose bard 90 deg fitting. I permanently mounted the 12 volt oil change pump in the rear hold by the engine and wired it up with a switch and connected the hoses.
Now all I have to do is place a container on the floor near the engine, turn on the pump and badda bing, the oil is out! Change the filter, pour in new oil and stick a fork in me cause I am done!!"
"I recently had the dis-pleasure of changing the oil in my AQ125 for the first time. After all the contorting, reaching, swearing and spilling of oil in the bilge, I decided there was 2 options...set fire to it and claim insurance or figure out a reliable permanent method.
I pulled the drain plug and drilled and tapped the center to 1/4 pipe thread and bought a 1/4 pipe x 3/8 hose bard 90 deg fitting. I permanently mounted the 12 volt oil change pump in the rear hold by the engine and wired it up with a switch and connected the hoses.
Now all I have to do is place a container on the floor near the engine, turn on the pump and badda bing, the oil is out! Change the filter, pour in new oil and stick a fork in me cause I am done!!"