Honda 75 flush kit

"I have an older Honda BF 75 o

"I have an older Honda BF 75 out board on my sailboat, currently in salt water. I will be keeping her in a slip for the next two months and I would like to to be able to flush the motor with fresh water after each use. Is there a flush kit or practical way the flush these? A standard ear muff won't work because of the location and configuration of the water in take.
Thanks in advance."

honda made a flusher-035100-19

honda made a flusher-035100-19010-935-810. But just between you and me it looks pretty funny. Was a spring loaded piece that went to the intake and you needed to remove the prop???? so you might consider putting a tap to the water jacket - like maybe at the pee-hole and back flush it from there.

"No need to remove the prop, j

"No need to remove the prop, just don't have it in gear.

Pee hole won't do it, but perhaps you could put a 'tee' in the 3/8" (or so) bypass tube that goes up from aft of oil cap over to in front of thermostat.

I would use that Honda Water Mouth flusher that William mentioned over the intake/exhaust fitting."

Thanks guys. Do you know where

Thanks guys. Do you know where I can find this part? I did a search on this site for the part # that William posted but nothing showed up.

"[url][url=""]http://www.boats

"[url=""]http://www.boats.net/parts/detail/honda/H-190A1-881-650.html[/url]

Their 'Brick & Mortar' is in Sebring, Florida and they usually ship by US Mail.

Toll-Free phone number is on the site for excellent support if needed.
__________________________________________

edit: I see it shows "...Not Available..." so give them a phone call. I have found that Telephone Support often has replacement p/n's that can't be found on their web site.

P.S. > here it is:

http://www.boats.net/parts/detail/honda/H-06190-881-860.html


...well just copy/paste the above url (between the and code tags)

Best to phone them to be sure it's the one you need "