laogong1947
New member
I converted to electronic igni
I converted to electronic ignition and used the same coil. Within 1.5 hours running engine progressively ran rougher under load and would only run at idle. I changed coil to higher output. Engine ran fine for 1 hour then would not start after docking for 3 days. Can a higher output coil cause a problen with the electronic ignition? I was under the impression that electonic igniton could use a higher out put coil. Please comment on whether the coil or the electronic igniton is likely the problem.
I converted to electronic ignition and used the same coil. Within 1.5 hours running engine progressively ran rougher under load and would only run at idle. I changed coil to higher output. Engine ran fine for 1 hour then would not start after docking for 3 days. Can a higher output coil cause a problen with the electronic ignition? I was under the impression that electonic igniton could use a higher out put coil. Please comment on whether the coil or the electronic igniton is likely the problem.